Home > News > Content
Bathroom Cabinet Waterproof Eight Details To Consider
Aug 15, 2017

  Bathroom Cabinet Waterproof Eight details to consider

  Bathroom cabinets in the use of materials and production is generally considered damp-proof, but also need to pay attention to the details of installation, in order to achieve all-round moisture and humidity.

  1: Wooden bathroom cabinets to absorb water easily deformed, so it has very stringent requirements for the surrounding environment, and ordinary family bathrooms are generally only a few square meters of space, not easy to dry and wet zoning. In the purchase of bathroom cabinets, you can use fire board, wear plate, polymer and other composite plate as a cabinet surface materials, they not only have very good moisture resistance, but also to simulate the color of solid wood.

  2: Bathroom Cabinets If the choice of wooden cabinet legs can easily damp, and will unknowingly in the moisture to the cabinet body, will eventually lead to the entire cabinet deformation. If the bottom of the cabinet body using metal as supporting leg material supporting the cabinet, the problem has been cleverly resolved.

  3: Hardware connectors including rails, hinges and other parts, although only a few small accessories, but bear the bathroom cabinets open and close the task. Ordinary hardware connectors are more delicate, slightly corrosive rust will lead to doors, drawers can not open or close, and affect the service life of bathroom cabinets.

  4: In the cabinet body and door contact place, installed with anti-collision function of the rubber, impact can be a good buffer, a simple small discovery, easy to eliminate the noise of the door, water vapor is also shut out. Use multi-function collision-proof rubber strip to wrap the edge of the plate, to block the invasion of moisture completely.

  5: The basin directly connected to the cabinet body of the bathroom cabinets are common to us, the use of the frequency is also quite high. The outlet pipe of the basin will pass through the bottom plate into the underground, the condensate in the basin will also take the opportunity to slip from the edge of the plate to the bottom of the cabinet, and make the floor of the bathroom cabinet damp and deformed.

  6: The main source of moisture is the ground, to solve the bathroom cabinet at the bottom of the problem of suction, successfully blocked the bathroom cabinets in 50% of water vapor infiltration. The development of the wall mirror cabinet, can avoid the cabinet body directly contact with the ground, and maximize the use of the upper room of the bathroom, "hanging design" and "waterproof material" two major technology strong together, so that the annoying moisture did not come to the water.

  7: Cabinet material is the main body of the bathroom cabinet, it is concealed by cover material, it is easy to be neglected by people. Because the box materials can not be seen in the range of sight, many people think that the use of inexpensive plate also does not matter.

  8: According to their usual bathing experience, we will find that the bathroom or faucet encountered hot air will produce a large number of condensed water, the water will flow down the table to the bottom of the cabinet, causing the mold deformation of the cabinet body. If you can in a timely manner in the bottom of the cabinet with a layer of waterproof aluminum foil or rubber pads can solve this problem, put them in the bottom of the drawer, in the damp-proof at the same time can be fixed bath products.